|
Plastic Material Specs
|
|
|
|
NYLATRON GS FILLED NYLON |
NYLATRON NS FILLED NYLON |
NYLATRON GSM NYLON |
NYLATRON GSM-BLUE NYLON |
NYLATRON NSM NYLON |
MC 901 BLUE NYLON |
MC 904 BLUE NYLON |
MC 907 NATURAL NYLON |
ST801 NYLON |
HYDLAR ZF NYLON |
HYDLAR ZF NYLON |
|
|
Units |
ASTM Test Method |
MoS2 FILLED TYPE 6/6 POLYAMIDE |
LUBRICATED TYPE 6/6 POLYAMIDE |
MoS2 FILLED TYPE 6 POLYAMIDE |
LUBRICATED TYPE 6 POLYAMIDE |
LUBRICATED TYPE 6 POLYAMIDE |
MONOCAST HEAT STABILIZED TYPE 6 POLYAMIDE |
PLASTICIZED HEAT STABILIZED TYPE 6 POLYAMIDE |
MONOCAST FDA TYPE 6 POLYAMIDE |
IMPACT MODIFIED TYPE 6/6 POLYAMIDE |
ARAMID-FILLED TYPE 6/6 POLYAMIDE |
30% GLASS-FILLED BLACK NYLON |
MECHANICAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tensile Strength @73 F, (ult)/(yld)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tensile Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tensile Elongation at Break @ 73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexural Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compressive Strength, (% Deformation) @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compressive Modulus of Elasticity @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardness, Rockwell, Scale as noted @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardness, Durometer, Shore D @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Izod Impact, (Notched) @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coefficient of Friction, (Dry vs. Steel) Dynamic
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Limiting PV, (with 4 to 1 factor of safety applied)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
THERMAL |
Coefficient of Linear Thermal Expansion @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat Deflection Temperature @ 264 psi
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tg-Glass transition temperature, (Amorphous)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Melting Point, (VS=Vicat Softening Temp.)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Continuous Service Temperature in Air, (Max.)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ELECTRICAL |
Dielectric Strength, Short Term
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dielectric Constant @ 10E6 Hz
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dissipation Factor @ 10E6 Hz
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flammability @ 3.1 mm unless noted
|
|
|
|
|
|
|
|
|
|
|
|
|
|
H2O |
Water Absorbtion, Immersion, 24 Hrs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Water Absorbtion, Saturation
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Back to Top
|
|
|
|
POLYPENCO |
NYLATRON GS FILLED NYLON |
NYLATRON NS FILLED NYLON |
NYLATRON GSM NYLON |
NYLATRON GSM-BLUE NYLON |
NYLATRON NSM NYLON |
MC 901 BLUE NYLON |
MC 904 BLUE NYLON |
MC 907 NATURAL NYLON |
ST801 NYLON |
HYDLAR ZF NYLON |
HYDLAR ZF NYLON |
|
|
Units |
ASTM Test Method |
Type 6/6 Polyamide |
MoS2 FILLED TYPE 6/6 POLYAMIDE |
LUBRICATED TYPE 6/6 POLYAMIDE |
MoS2 FILLED TYPE 6 POLYAMIDE |
LUBRICATED TYPE 6 POLYAMIDE |
LUBRICATED TYPE 6 POLYAMIDE |
MONOCAST HEAT STABILIZED TYPE 6 POLYAMIDE |
PLASTICIZED HEAT STABILIZED TYPE 6 POLYAMIDE |
MONOCAST FDA TYPE 6 POLYAMIDE |
IMPACT MODIFIED TYPE 6/6 POLYAMIDE |
ARAMID-FILLED TYPE 6/6 POLYAMIDE |
30% GLASS-FILLED BLACK NYLON |
MECHANICAL |
Strength to Weight Ratio |
ksi |
- |
|
|
|
|
|
|
|
|
|
|
|
|
Specific Gravity @73 F |
- |
D792 |
1.15 |
1.16 |
1.18 |
1.16 |
1.15 |
1.15 |
1.15 |
1.15 |
1.15 |
1.08 |
1.19 |
1.36 |
Tensile Strength @73 F, (ult)/(yld) |
psi |
D638 |
11500 (ult) |
12500 (ult) |
10500(ult) |
10500(ult) |
10000(ult) |
11000(ult) |
11000(ult) |
9500(ult) |
12000(ult) |
6000(yld) |
17300(yld) |
13388(ult) |
Tensile Modulus of Elasticity @ 73 F |
psi |
D638 |
425000 |
480000 |
410000 |
400000 |
500000 |
410000 |
400000 |
275000 |
400000 |
- |
802000 |
654620 |
Tensile Elongation at Break @ 73 F |
% |
D638 |
50 |
25 |
10 |
30 |
35 |
20 |
20 |
50 |
20 |
210 |
4 |
7 |
Flexural Strength @ 73 F |
psi |
D790 |
15000 |
17000 |
14000 |
16000 |
15000 |
16000 |
16000 |
- |
16000 |
- |
21300 |
20550 |
Flexural Modulus of Elasticity @ 73 F |
psi |
D790 |
45000 |
460000 |
400000 |
500000 |
500000 |
475000 |
500000 |
- |
500000 |
245000 |
664000 |
723500 |
Shear Strength @ 73 F |
psi |
D732 |
10000 |
10500 |
9000 |
10500 |
- |
10000 |
11000 |
- |
11000 |
8400 |
- |
- |
Compressive Strength, (% Deformation) @73 F |
psi |
D695 |
12500(10) |
160000(10) |
12000(10) |
14000(10) |
13000(10) |
14000(10) |
15000(10) |
- |
15000(10) |
- |
19300(10) |
18070(10) |
Compressive Modulus of Elasticity @73 F |
psi |
D695 |
420000 |
420000 |
400000 |
400000 |
425000 |
400000 |
400000 |
- |
400000 |
- |
- |
- |
Hardness, Rockwell, Scale as noted @73 F |
- |
D785 |
M85(R115) |
M85(R115) |
M85(R115) |
M80(R110) |
M80(R117) |
M80(R115) |
M85(R115) |
M70 |
M85(R115) |
(R112) |
M80(R121) |
M65(R121) |
Hardness, Durometer, Shore D @73 F |
- |
D2240 |
D80 |
D85 |
D85 |
D85 |
- |
D85 |
D85 |
D85 |
D85 |
- |
- |
- |
Izod Impact, (Notched) @73 F |
ft-lb/in of notch |
D256 TypeA |
0.6 |
0.5 |
0.4 |
0.5 |
0.9 |
0.5 |
0.4 |
- |
0.4 |
17.0 |
1.2 |
2.3 |
Coefficient of Friction, (Dry vs. Steel) Dynamic |
- |
- |
0.25 |
0.20 |
0.16 |
0.20 |
0.18 |
.078 |
0.20 |
- |
0.20 |
0.28 |
0.32 |
- |
Limiting PV, (with 4 to 1 factor of safety applied) |
psi-ft/min |
- |
2700 |
3000 |
10000 |
3000 |
3800 |
12300 |
3000 |
- |
3000 |
- |
- |
- |
THERMAL |
Coefficient of Linear Thermal Expansion @73 F |
in/in/F |
E-831 (TMA) |
5.5E-05 |
4.0E-05 |
5.5E-05 |
5.0E-05 |
5.9E-05 |
5.0E-05 |
3.5E-05 |
3.5E-05 |
3.5E-05 |
6.7E-05 |
3.5E-05 |
1.7E-05 |
Heat Deflection Temperature @ 264 psi |
F |
D648 |
200 |
200 |
200 |
200 |
- |
200 |
200 |
200 |
200 |
160 |
- |
413 |
Tg-Glass transition temperature, (Amorphous) |
F |
D3418 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
420 |
Melting Point, (VS=Vicat Softening Temp.) |
F |
D3418 |
500 |
500 |
500 |
420 |
420 |
420 |
420 |
420 |
420 |
491 |
491 |
- |
Continuous Service Temperature in Air, (Max.) |
F |
- |
210 |
220 |
220 |
200 |
200 |
200 |
260 |
- |
200 |
- |
300 |
- |
Thermal Conductivity |
BTU-in/hr-ft2-F |
- |
1.7 |
1.7 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
ELECTRICAL |
Dielectric Strength, Short Term |
Volts/mil |
D149 |
400 |
350 |
350 |
400 |
- |
400 |
500 |
- |
500 |
- |
350 |
- |
Volume Resistivity |
ohm-cm |
D257 |
4.5e+13 |
2.5E+13 |
2.5E+13 |
2.5E+13 |
- |
2.5E+13 |
2.5E+13 |
- |
2.5E+13 |
1.0E+14 |
1.0E+15 |
- |
Dielectric Constant @ 10E6 Hz |
- |
D150 |
3.6 |
- |
- |
3.7 |
- |
- |
3.7 |
3.7 |
3.7 |
2.9 |
3.4 |
- |
Dissipation Factor @ 10E6 Hz |
- |
D150 |
0.020 |
- |
- |
- |
- |
- |
- |
- |
- |
0.020 |
0.010 |
- |
Flammability @ 3.1 mm unless noted |
- |
UL94 |
V-2 |
V-2 |
HB |
HB |
HB |
HB |
HB |
HB |
HB |
HB(0.81mm) |
- |
- |
H2O |
Water Absorbtion, Immersion, 24 Hrs |
% by wt. |
D570(7) |
0.30 |
0.30 |
0.30 |
0.30 |
0.22 |
0.25 |
0.30 |
0.30 |
0.30 |
1.20 |
1.20 |
- |
Water Absorbtion, Saturation |
% by wt. |
D570(7) |
7.00 |
7.00 |
7.00 |
7.00 |
7.00 |
7.00 |
7.00 |
7.00 |
7.00 |
6.70 |
8.50 |
- |
|
Back to Top
|
|
|
|
Ketron PEEK |
Victrex PEEK 450G |
Ketron PEEK |
30% Glass Filled Ketron PEEK |
30% Glass Filled Ketron PEEK |
Victrex PEEK 450GL30 |
30% Carbon Filled Ketron PEEK |
30% Carbon Filled Ketron PEEK |
Victrex PEEK 450CA30 |
Ketron PEEK HPV |
Victrex PEEK Optima LT |
|
|
Units |
ASTM Test Method |
Compression Molded Poly-etheretherketone |
Injection Molded Poly-etheretherketone |
Extruded Polyether-etherketone |
Compression Molded 30% GF PEEK |
Extruded 30% Glass Filled PEEK |
Injection Molded 30% GF PEEK |
Compression Molded 30% CF PEEK |
Extruded 30% Carbon Filled PEEK |
Injection Molded 30% CF PEEK |
Bearing Grade Polyether-etherketone |
Injection Molded Poly-etheretherketone |
MECHANICAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tensile Strength @73 F, (ult)/(yld)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tensile Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tensile Elongation at Break @ 73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexural Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compressive Strength, (% Deformation) @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compressive Modulus of Elasticity @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardness, Rockwell, Scale as noted @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardness, Durometer, Shore D @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Izod Impact, (Notched) @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coefficient of Friction, (Dry vs. Steel) Dynamic
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Limiting PV, (with 4 to 1 factor of safety applied)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
THERMAL |
Coefficient of Linear Thermal Expansion @73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat Deflection Temperature @ 264 psi
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tg-Glass transition temperature, (Amorphous)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Melting Point, (VS=Vicat Softening Temp.)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Continuous Service Temperature in Air, (Max.)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ELECTRICAL |
Dielectric Strength, Short Term
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dielectric Constant @ 10E6 Hz
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dissipation Factor @ 10E6 Hz
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flammability @ 3.1 mm unless noted
|
|
|
|
|
|
|
|
|
|
|
|
|
|
H2O |
Water Absorbtion, Immersion, 24 Hrs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Water Absorbtion, Saturation
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Back to Top
|
|
|
|
X |
XX |
XXX |
C, CE |
L, LE |
|
|
Units |
ASTM Test Method |
Paper Phenolic |
Paper Phenolic |
Paper Phenolic |
Canvas Phenolic |
Linen Phenolic |
MECHANICAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tensile Strength @73 F, (ult)/(yld)
|
|
|
|
|
|
|
|
Tensile Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
Tensile Elongation at Break @ 73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexural Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compressive Strength, (% Deformation) @73 F
|
|
|
|
|
|
|
|
Compressive Modulus of Elasticity @73 F
|
|
|
|
|
|
|
|
Hardness, Rockwell, Scale as noted @73 F
|
|
|
|
|
|
|
|
Hardness, Durometer, Shore D @73 F
|
|
|
|
|
|
|
|
Izod Impact, (Notched) @73 F
|
|
|
|
|
|
|
|
Coefficient of Friction, (Dry vs. Steel) Dynamic
|
|
|
|
|
|
|
|
Limiting PV, (with 4 to 1 factor of safety applied)
|
|
|
|
|
|
|
|
THERMAL |
Coefficient of Linear Thermal Expansion @73 F
|
|
|
|
|
|
|
|
Heat Deflection Temperature @ 264 psi
|
|
|
|
|
|
|
|
Tg-Glass transition temperature, (Amorphous)
|
|
|
|
|
|
|
|
Melting Point, (VS=Vicat Softening Temp.)
|
|
|
|
|
|
|
|
Continuous Service Temperature in Air, (Max.)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ELECTRICAL |
Dielectric Strength, Short Term
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dielectric Constant @ 10E6 Hz
|
|
|
|
|
|
|
|
Dissipation Factor @ 10E6 Hz
|
|
|
|
|
|
|
|
Flammability @ 3.1 mm unless noted
|
|
|
|
|
|
|
|
H2O |
Water Absorbtion, Immersion, 24 Hrs
|
|
|
|
|
|
|
|
Water Absorbtion, Saturation
|
|
|
|
|
|
|
|
|
Back to Top
|
|
|
|
Hyzod M Polycarbonate |
Glass Filled Polycarbonate |
|
|
Units |
ASTM Test Method |
Extruded Polycarbonate |
Extruded 20% Glass Filled Polycarbonate |
MECHANICAL |
|
|
|
|
|
|
|
|
|
|
Tensile Strength @73 F, (ult)/(yld)
|
|
|
|
|
Tensile Modulus of Elasticity @ 73 F
|
|
|
|
|
Tensile Elongation at Break @ 73 F
|
|
|
|
|
|
|
|
|
|
Flexural Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
|
|
Compressive Strength, (% Deformation) @73 F
|
|
|
|
|
Compressive Modulus of Elasticity @73 F
|
|
|
|
|
Hardness, Rockwell, Scale as noted @73 F
|
|
|
|
|
Hardness, Durometer, Shore D @73 F
|
|
|
|
|
Izod Impact, (Notched) @73 F
|
|
|
|
|
Coefficient of Friction, (Dry vs. Steel) Dynamic
|
|
|
|
|
Limiting PV, (with 4 to 1 factor of safety applied)
|
|
|
|
|
THERMAL |
Coefficient of Linear Thermal Expansion @73 F
|
|
|
|
|
Heat Deflection Temperature @ 264 psi
|
|
|
|
|
Tg-Glass transition temperature, (Amorphous)
|
|
|
|
|
Melting Point, (VS=Vicat Softening Temp.)
|
|
|
|
|
Continuous Service Temperature in Air, (Max.)
|
|
|
|
|
|
|
|
|
|
ELECTRICAL |
Dielectric Strength, Short Term
|
|
|
|
|
|
|
|
|
|
Dielectric Constant @ 10E6 Hz
|
|
|
|
|
Dissipation Factor @ 10E6 Hz
|
|
|
|
|
Flammability @ 3.1 mm unless noted
|
|
|
|
|
H2O |
Water Absorbtion, Immersion, 24 Hrs
|
|
|
|
|
Water Absorbtion, Saturation
|
|
|
|
|
|
Back to Top
|
|
|
|
Poly-Propylene |
|
|
Units |
ASTM Test Method |
Extruded Poly-Propylene |
MECHANICAL |
|
|
|
|
|
|
|
|
Tensile Strength @73 F, (ult)/(yld)
|
|
|
|
Tensile Modulus of Elasticity @ 73 F
|
|
|
|
Tensile Elongation at Break @ 73 F
|
|
|
|
|
|
|
|
Flexural Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
Compressive Strength, (% Deformation) @73 F
|
|
|
|
Compressive Modulus of Elasticity @73 F
|
|
|
|
Hardness, Rockwell, Scale as noted @73 F
|
|
|
|
Hardness, Durometer, Shore D @73 F
|
|
|
|
Izod Impact, (Notched) @73 F
|
|
|
|
Coefficient of Friction, (Dry vs. Steel) Dynamic
|
|
|
|
Limiting PV, (with 4 to 1 factor of safety applied)
|
|
|
|
THERMAL |
Coefficient of Linear Thermal Expansion @73 F
|
|
|
|
Heat Deflection Temperature @ 264 psi
|
|
|
|
Tg-Glass transition temperature, (Amorphous)
|
|
|
|
Melting Point, (VS=Vicat Softening Temp.)
|
|
|
|
Continuous Service Temperature in Air, (Max.)
|
|
|
|
|
|
|
|
ELECTRICAL |
Dielectric Strength, Short Term
|
|
|
|
|
|
|
|
Dielectric Constant @ 10E6 Hz
|
|
|
|
Dissipation Factor @ 10E6 Hz
|
|
|
|
Flammability @ 3.1 mm unless noted
|
|
|
|
H2O |
Water Absorbtion, Immersion, 24 Hrs
|
|
|
|
Water Absorbtion, Saturation
|
|
|
|
|
Back to Top
|
|
|
|
HI-Impact Polystyrene |
|
|
Units |
ASTM Test Method |
Extruded Polystyrene |
MECHANICAL |
|
|
|
|
|
|
|
|
Tensile Strength @73 F, (ult)/(yld)
|
|
|
|
Tensile Modulus of Elasticity @ 73 F
|
|
|
|
Tensile Elongation at Break @ 73 F
|
|
|
|
|
|
|
|
Flexural Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
Compressive Strength, (% Deformation) @73 F
|
|
|
|
Compressive Modulus of Elasticity @73 F
|
|
|
|
Hardness, Rockwell, Scale as noted @73 F
|
|
|
|
Hardness, Durometer, Shore D @73 F
|
|
|
|
Izod Impact, (Notched) @73 F
|
|
|
|
Coefficient of Friction, (Dry vs. Steel) Dynamic
|
|
|
|
Limiting PV, (with 4 to 1 factor of safety applied)
|
|
|
|
THERMAL |
Coefficient of Linear Thermal Expansion @73 F
|
|
|
|
Heat Deflection Temperature @ 264 psi
|
|
|
|
Tg-Glass transition temperature, (Amorphous)
|
|
|
|
Melting Point, (VS=Vicat Softening Temp.)
|
|
|
|
Continuous Service Temperature in Air, (Max.)
|
|
|
|
|
|
|
|
ELECTRICAL |
Dielectric Strength, Short Term
|
|
|
|
|
|
|
|
Dielectric Constant @ 10E6 Hz
|
|
|
|
Dissipation Factor @ 10E6 Hz
|
|
|
|
Flammability @ 3.1 mm unless noted
|
|
|
|
H2O |
Water Absorbtion, Immersion, 24 Hrs
|
|
|
|
Water Absorbtion, Saturation
|
|
|
|
|
Back to Top
|
|
|
|
PVC Gray Type I |
|
|
Units |
ASTM Test Method |
PolyVinyl-Chloride |
MECHANICAL |
|
|
|
|
|
|
|
|
Tensile Strength @73 F, (ult)/(yld)
|
|
|
|
Tensile Modulus of Elasticity @ 73 F
|
|
|
|
Tensile Elongation at Break @ 73 F
|
|
|
|
|
|
|
|
Flexural Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
Compressive Strength, (% Deformation) @73 F
|
|
|
|
Compressive Modulus of Elasticity @73 F
|
|
|
|
Hardness, Rockwell, Scale as noted @73 F
|
|
|
|
Hardness, Durometer, Shore D @73 F
|
|
|
|
Izod Impact, (Notched) @73 F
|
|
|
|
Coefficient of Friction, (Dry vs. Steel) Dynamic
|
|
|
|
Limiting PV, (with 4 to 1 factor of safety applied)
|
|
|
|
THERMAL |
Coefficient of Linear Thermal Expansion @73 F
|
|
|
|
Heat Deflection Temperature @ 264 psi
|
|
|
|
Tg-Glass transition temperature, (Amorphous)
|
|
|
|
Melting Point, (VS=Vicat Softening Temp.)
|
|
|
|
Continuous Service Temperature in Air, (Max.)
|
|
|
|
|
|
|
|
ELECTRICAL |
Dielectric Strength, Short Term
|
|
|
|
|
|
|
|
Dielectric Constant @ 10E6 Hz
|
|
|
|
Dissipation Factor @ 10E6 Hz
|
|
|
|
Flammability @ 3.1 mm unless noted
|
|
|
|
H2O |
Water Absorbtion, Immersion, 24 Hrs
|
|
|
|
Water Absorbtion, Saturation
|
|
|
|
|
Back to Top
|
|
|
|
Tectron PPS |
|
|
Units |
ASTM Test Method |
Extruded Polyphenelyne-sulfide |
MECHANICAL |
|
|
|
|
|
|
|
|
Tensile Strength @73 F, (ult)/(yld)
|
|
|
|
Tensile Modulus of Elasticity @ 73 F
|
|
|
|
Tensile Elongation at Break @ 73 F
|
|
|
|
|
|
|
|
Flexural Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
Compressive Strength, (% Deformation) @73 F
|
|
|
|
Compressive Modulus of Elasticity @73 F
|
|
|
|
Hardness, Rockwell, Scale as noted @73 F
|
|
|
|
Hardness, Durometer, Shore D @73 F
|
|
|
|
Izod Impact, (Notched) @73 F
|
|
|
|
Coefficient of Friction, (Dry vs. Steel) Dynamic
|
|
|
|
Limiting PV, (with 4 to 1 factor of safety applied)
|
|
|
|
THERMAL |
Coefficient of Linear Thermal Expansion @73 F
|
|
|
|
Heat Deflection Temperature @ 264 psi
|
|
|
|
Tg-Glass transition temperature, (Amorphous)
|
|
|
|
Melting Point, (VS=Vicat Softening Temp.)
|
|
|
|
Continuous Service Temperature in Air, (Max.)
|
|
|
|
|
|
|
|
ELECTRICAL |
Dielectric Strength, Short Term
|
|
|
|
|
|
|
|
Dielectric Constant @ 10E6 Hz
|
|
|
|
Dissipation Factor @ 10E6 Hz
|
|
|
|
Flammability @ 3.1 mm unless noted
|
|
|
|
H2O |
Water Absorbtion, Immersion, 24 Hrs
|
|
|
|
Water Absorbtion, Saturation
|
|
|
|
|
Back to Top
|
|
|
|
Virgin Teflon |
25% Glass Reinforced Teflon |
Fluorosint 207 |
Fluorosint 500 |
Semitron ESD500 |
|
|
Units |
ASTM Test Method |
Polytetrafluoro-ethylene |
25% Glass Filled Polytetrafluoro-ethylene |
FDA Synthetic Mica-Filled PTFE |
Synthetic Mica-Filled PTFE |
Electrostatic Dissapative PTFE |
MECHANICAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tensile Strength @73 F, (ult)/(yld)
|
|
|
|
|
|
|
|
Tensile Modulus of Elasticity @ 73 F
|
|
|
|
|
|
|
|
Tensile Elongation at Break @ 73 F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexural Modulus of Elasticity @ 73 F
| | |
Home